What should you pay attention to when you first come into contact with resin tiles?

I believe that you who have replaced roof tiles or are preparing to replace roof tiles should have heard of the three words resin tiles, and some people have even used them. What we hear most often are the various benefits and advantages of resin tiles. Then these advantages and benefits actually refer to truly qualified resin tiles. So as a first-time user of resin tiles, can you really distinguish the real from the fake and avoid fraud traps?

Understanding misunderstanding 1: Compare prices with the same appearance?
The same appearance does not mean the same inside. Some inferior resin tiles are golden and jade on the outside, but rotten inside. You can't tell the difference simply by looking at them. Good resin tiles must be consistent inside and out. Remember not to look for bargains everywhere just because they look similar. There are not so many bargains waiting for you to take advantage of.

Understanding misunderstanding 2: Thickness equals quality?
Thickness is only one factor that affects quality, but it is by no means all. For example, under normal circumstances, recycled 3.0 resin tiles are not as good as raw materials 2.5. Don't think that the quality will be good if the thickness meets the standard.

Understanding misunderstanding 3: The heavier the weight, the better the quality?
Some resin tile manufacturers claim that their resin tiles are of good quality. They are heavy enough and weigh enough kilograms. You think that the lighter ones are shoddy. In fact, it is just the opposite. The lighter the weight per square meter of the resin tile, the better the quality.

Understanding Misunderstanding 4: Is the quality of four-layer co-extrusion better than three-layer and two-layer resin tiles?
Four-layer co-extrusion refers to the production process or platform of resin tiles, which only represents the production process. The difference is that the production capacity of four layers is higher and the number of layers can be distinguished. But it cannot be said that four layers must be of better quality than two or three layers.